Compare 2 FILES line by line:
diff file1.txt file2.txt
Compare 2 FILES line by line and ignore all white space:
diff -w file1.txt file2.txt
Compare 2 FILES side by side (output in two columns) and ignore case differences in file contents:
diff -yi file1.txt file2.txt
Directories with multiple files/subdirectories: report recursively if files differ:
diff -qr dir1 dir2
Directories with multiple files/subdirectories: report recursively if files differ and ignore all white space:
diff -wqr dir1 dir2
All diff options:
DIFF(1) User Commands DIFF(1)
NAME
diff - compare files line by line
SYNOPSIS
diff [OPTION]... FILES
DESCRIPTION
Compare FILES line by line.
Mandatory arguments to long options are mandatory for short options too.
--normal
output a normal diff (the default)
-q, --brief
report only when files differ
-s, --report-identical-files
report when two files are the same
-c, -C NUM, --context[=NUM]
output NUM (default 3) lines of copied context
-u, -U NUM, --unified[=NUM]
output NUM (default 3) lines of unified context
-e, --ed
output an ed script
-n, --rcs
output an RCS format diff
-y, --side-by-side
output in two columns
-W, --width=NUM
output at most NUM (default 130) print columns
--left-column
output only the left column of common lines
--suppress-common-lines
do not output common lines
-p, --show-c-function
show which C function each change is in
-F, --show-function-line=RE
show the most recent line matching RE
--label LABEL
use LABEL instead of file name and timestamp (can be repeated)
-t, --expand-tabs
expand tabs to spaces in output
-T, --initial-tab
make tabs line up by prepending a tab
--tabsize=NUM
tab stops every NUM (default 8) print columns
--suppress-blank-empty
suppress space or tab before empty output lines
-l, --paginate
pass output through 'pr' to paginate it
-r, --recursive
recursively compare any subdirectories found
--no-dereference
don't follow symbolic links
-N, --new-file
treat absent files as empty
--unidirectional-new-file
treat absent first files as empty
--ignore-file-name-case
ignore case when comparing file names
--no-ignore-file-name-case
consider case when comparing file names
-x, --exclude=PAT
exclude files that match PAT
-X, --exclude-from=FILE
exclude files that match any pattern in FILE
-S, --starting-file=FILE
start with FILE when comparing directories
--from-file=FILE1
compare FILE1 to all operands; FILE1 can be a directory
--to-file=FILE2
compare all operands to FILE2; FILE2 can be a directory
-i, --ignore-case
ignore case differences in file contents
-E, --ignore-tab-expansion
ignore changes due to tab expansion
-Z, --ignore-trailing-space
ignore white space at line end
-b, --ignore-space-change
ignore changes in the amount of white space
-w, --ignore-all-space
ignore all white space
-B, --ignore-blank-lines
ignore changes where lines are all blank
-I, --ignore-matching-lines=RE
ignore changes where all lines match RE
-a, --text
treat all files as text
--strip-trailing-cr
strip trailing carriage return on input
-D, --ifdef=NAME
output merged file with '#ifdef NAME' diffs
--GTYPE-group-format=GFMT
format GTYPE input groups with GFMT
--line-format=LFMT
format all input lines with LFMT
--LTYPE-line-format=LFMT
format LTYPE input lines with LFMT
These format options provide fine-grained control over the output
of diff, generalizing -D/--ifdef.
LTYPE is 'old', 'new', or 'unchanged'.
GTYPE is LTYPE or 'changed'.
GFMT (only) may contain:
%< lines from FILE1
%> lines from FILE2
%= lines common to FILE1 and FILE2
%[-][WIDTH][.[PREC]]{doxX}LETTER
printf-style spec for LETTER
LETTERs are as follows for new group, lower case for old group:
F first line number
L last line number
N number of lines = L-F+1
E F-1
M L+1
%(A=B?T:E)
if A equals B then T else E
LFMT (only) may contain:
%L contents of line
%l contents of line, excluding any trailing newline
%[-][WIDTH][.[PREC]]{doxX}n
printf-style spec for input line number
Both GFMT and LFMT may contain:
%% %
%c'C' the single character C
%c'\OOO'
the character with octal code OOO
C the character C (other characters represent themselves)
-d, --minimal
try hard to find a smaller set of changes
--horizon-lines=NUM
keep NUM lines of the common prefix and suffix
--speed-large-files
assume large files and many scattered small changes
--color[=WHEN]
color output; WHEN is 'never', 'always', or 'auto'; plain --color means --color='auto'
--palette=PALETTE
the colors to use when --color is active; PALETTE is a colon-separated list of terminfo capabilities
--help display this help and exit
-v, --version
output version information and exit
FILES are 'FILE1 FILE2' or 'DIR1 DIR2' or 'DIR FILE' or 'FILE DIR'. If --from-file or --to-file is given, there are no restrictions on FILE(s).
If a FILE is '-', read standard input. Exit status is 0 if inputs are the same, 1 if different, 2 if trouble.
AUTHOR
Written by Paul Eggert, Mike Haertel, David Hayes, Richard Stallman, and Len Tower.
REPORTING BUGS
Report bugs to: bug-diffutils@gnu.org
GNU diffutils home page: <https://www.gnu.org/software/diffutils/>
General help using GNU software: <https://www.gnu.org/gethelp/>
COPYRIGHT
Copyright © 2021 Free Software Foundation, Inc. License GPLv3+: GNU GPL version 3 or later <https://gnu.org/licenses/gpl.html>.
This is free software: you are free to change and redistribute it. There is NO WARRANTY, to the extent permitted by law.
SEE ALSO
wdiff(1), cmp(1), diff3(1), sdiff(1), patch(1)
The full documentation for diff is maintained as a Texinfo manual. If the info and diff programs are properly installed at your site, the command
info diff
should give you access to the complete manual.
diffutils 3.8 August 2021 DIFF(1)
Neuen Kommentar schreiben